VSI6S1263 Vertical Shaft Impact Crusher
OUTPUT SIZE: Various size
PRODUCTION CAPACITY: Up to 800TPH
Can be vastly applied in the metal and nonmetal ore、construction material、artificial sand and all kinds of metallurgy slag crushing and shaping
1. Apply to fragility stone hardness below Moh's 9 degree，unwelcome to sticky material and muddy much material； 2. Apply to material water content lower than 20%； 3. Apply to special flammable material as coal、calcium carbide and so on.
1. The rotor adopts the advanced 4-way discharging design to improve the passing capacity; The crushing ratio increases more than 20%, compared with the 3-way old type.
2. To optimize the rotor structure and manufacturing technology, it increases the rotor life more than 30-200%, compared with the old type.
3. The transmission part adopts the special sealing design to avoid the oil-leaking of the bearings tube; 3 national patents; The bearings are German/USA imported.
4. Special crane device design, easy to maintenance.
5. Discharging part design: simple, effective and avoid the high moisture material blocks.
6. Rock on rock working principle. Reduce the wear parts and maintenance cost.
|all central feed(t/h)||454-486||547-586|
|Max feeding size（mm）||50||60|
|Weight(t)||rock on rock||20|
|rock on steel||23|
|thin oil lubrication station||Flow capacity（L/min）||20|
|Safety protection||Stop automatically without oil flow; wind cooling system; Heater system in winter|
Note： Any change of B series VSI6S1263 technical data shall not be advised additionally.