KFD Mining Trapezium Grinding Mill


  • TGM series Super Demand Trapezium Mill is chiefly applied towards the powder processing of nutrient products inside industries of metallurgy, building, chemistry, along with mining etc. It can easily produce powdered from a lot more than 28

Info of KFD Mining Trapezium Grinding Mill:

TGM series Super Demand Trapezium Mill is chiefly applied towards the powder processing of nutrient products inside industries of metallurgy, building, chemistry, along with mining etc. It can easily produce powdered from a lot more than 280 types of non-inflammable and non-explosive nutrient materials with Mohs hardness below 9.3 and humidity under 6%, such as barite, limestone, quartz, calcite, granite, kaolin, basalt, gypsum and so on. The last size can be between 80 mesh and also 425 interlock ( the finest could also be eight hundred mesh).

KFD Mining Trapezium Grinding Mill Programs:

metallurgy,building materials,substance and mining

KFD Mining Trapezium Grinding Mill PROCESSED MATERIALS:

no-flammable and also non-intense minerals with Moh’azines hardness lower than 9 along with humidity below 6%

KFD Mining Trapezium Grinding Mill Effectiveness

Compared with all the traditional grinding mill,the Ace Pressure Trapezium Grinding Mill has beneath advantages:

1. The trapezium bone roller in addition to grinding ring improve the grinding efficiency drastically. The crimper and grinding ring were created in the other way up trapezium with different diameter,which often reduce your slip rate of supplies between tumbler pigeon and grinding ring,prolong grinding time,and also improve the particular grinding efficiency;

2. With higher efficient balanced adding stress springs.Following the attributes of Raymond Mill and Underhand Suspension Mill,Super Press Trapezium Grinder has longer service lifetime. The tumbler assembly continues to be linked by the pulling rod and this levelled arises, with this radial pressure yeilding, that avoids the bulk material getting into the grinding chamber to wear down the main axis as well as the the bearings, thence the service life is going to be longer;

3. Using variable connection for connecting main figure and dust concentrator,hence the damping spring and airproof belt can reduce the vibration and also noise,and prevent the ringing as nicely;

4. There will be high desity and also high preciseness impeller;

5. There is high-productivity and power-saving centrifugal induced write fan;

6. With the impeller changing device gives more appliance. The wholesale between property and powder concentrator’azines blade front end also personal effects the delicacy of a final product.The patent technological know-how enables alter the settlement more appliance.
 

Technical Parameter Of Trapezium Grinding Mill :

Mm to inch conversion: 25.4millimeters=1 inch
The humidity and hardness of raw material will affect the fineness and capacity.

 

 

Item\Model TGM100 TGM130 TGM160
Roller piece 4 5 6
Roller Diameter×Height(mm) Ф320×200 Ф410×240 Ф440×270
Ring Inner Diameter×Height(mm) Ф980×200 Ф1280×240 Ф1600×270
Speed Of Main frame (r/min) 130 103 82
Max. Input Size (mm) <25 <30 <35
Product Size (mm) 1.6~0.045
fineness can reach to 0.038
1.6~0.045
fineness can reach to 0.038
1.6~0.045
fineness can reach to 0.038
Capacity (t/h) 3~8 6~15 9~22
Overall Dimension (mm) 9910×5365×8310 7910×7000×9645 12550×5700×8355
Weight (t) 16 26.1 35

 

Note:
1. Based upon limestone-grinding with 80% pass-through;
2. The final technical data are subject to the operation manual along with the machine.

Table 2:

 

 

Name Item Unit Specifications & Technical Data
TGM100 TGM130 TGM160
Motor for main frame Model   Y225M-4 Y280M-4 Y135M1-4
Power kW 45 90 132
Rev. rpm 1480 1480 1480
Motor for separator Model   YCT200-4A YCT200-4B YCT225-4A
Power kW 5.5 7.5 11
Rev rpm 125~1250 125~1250 125~1250
Motor for Elevator Model   Y100L-4 Y100L2-4 Y112M-4
Power kW 3 3 4
Rev rpm 1420 1420 1420
Motor for Blower Model   Y225M-4 Y280M-4 Y135M1-4
Power kW 45 90 132
REV rpm 1480 1480 1480
Motor for Jaw Crusher Model PE 200×350 250×400 250×400 250×750
Y160M-6 Y180L-6 Y180L-6 Y200M-6
Power KW 7.5 15 15 22
REV rpm 970 970 970
Electro-Magnetic Vibrating Feeder Model   GZ2F GZ2F GZ3F
Power W 150 150 200

 

Note: The final technical data are subject to the operation manual along with the machine.

WIKI | FAQ | Contact Us
© 2008-2015 by KFD CRUSHER, All rights reserved